Udførte Projekter i ind- og udland:
|Weather Stations for Waste Depositing
Davis Vantage Pro2 Weather Stations have been used at several Waste Deposit Stations for monitoring the weather parameters and especially monitoring precipitation for annually calculation of the percolat production. VantagePro has been used, due to precision in sensors, well-function software and a low price. Lifetime for the stations are typically 3 to 5 years, depending of the environments around the stations.
Location: Waste Depositing Stations in Denmark
System: Davis Vantage Pro2
Data Handling: On-line through wireless connection between Sensor Unit and Console.
WeatherLink Datalogger and software is used for logging and analyzing of data.
|Hobo Weather and Micro Stations
For an institute within University of Copenhagen we have delivered some Hobo Weather Stations for stand-alone measurement of air-temperature, air-humidity, rain and solar radiation. This price-effective weather station has a very low power consumption, very precise sensors and for the PC a well function software with possible remote facilities through Radio Modem connection. The Micro Datalogger has been used for several measurement systems, monitoring wind speed into top of cranes. These measurements are used for documentation of too high wind speeds, with the result of down time for the cranes.
Location: Denmark and abroad
Systems: Hobo Weather Station and Hobo Micro Station
Sensors: Air-temperature, Humidity, Rain, Pyranometer, Wind Speed
Data Handling: off-line and on-line with HoboWare Pro & Remote Site Manager Software
|IKKA Fjord Project,
In close co-operation with Geological Institute, part of University of Copenhagen, ED Service-Center has delivered an AADI 3660 Datalogger Measurement system with sensors for offshore measurement of Oxygen, Conductivity, pH, Water Temperature and flow. All as stand alone measurement, battery powered for a period of at least 10 month. A 110m sea cable from datalogger onshore connect the sensors to the datalogger. A special flow sensor with electronic control unit has been developed and produced for measuring of flow through the Ikaite Columns. A flow as low as 100ml per hour should be measured.
Location: South West of Greenland
System: Aanderaa Data Instruments, ED
Sensors: Oxygen, Conductivity, pH, Temperature, Flow
Data Handling: off-line by DSU unit and AADI read out software
Photographs: Marc O Hansen & Richard Martin
|Galathea 3 Expedition
For the Galathea 3 Expedition we have delivered Li-Cor sensors and Metering equipment for underwater measurements. Same type of equipment has been delivered to Danish Universities.
Location: Denmark and worldwide
System: Li-Cor Dataloggers and Meters
Sensors: Quantum Sensors, Pyranometer Sensors.
Data Handling: off-line and on-line
|RDCP600 combined with Oxygen Optode
In close co-operation with Aanderaa Data Instruments (AADI) we arranged a test of RDCP600 with NERI (The National Environmental Research Institute, also named DMU), and Jens Larsen as perator.
NERI wanted a test of RDCP600 within Current Speed/Direction, Water Temperature, Conductivity and Oxygen, measured from a special box, placed at the bottom. An 3835 Oxygen Optode had been connected to RDCP600 as external sensor for the test.
The operator was very satisfied with the instrument and got high quality data out from the test.
System: RDCP600 from AADI
Sensors: Current Speed/Direction, Temperature, Conductivity, Oxygen
Data Handling: Off-line with RDCP Studio software from AADI
Forrige side - Forside - Næste side